Specifications Guide

Species (face): Western Red Cedar, Douglas Fir/Larch, Idaho White Fir, Ponderosa Pine, and Southern Pine

Grades: Supreme, Decorative, and Service

Textures: Smooth surface, smooth sanded, course sanded (16 grit), resawn (cross band-saw texture), and wire brushed

Nominal Sizes: 2 x 6, 2 x 8, 3 x 6, 3 x 8, 4 x 6, 4 x 8, 5 x 6, and 5 x 8

Lengths: Random 6 ft. to 16 ft. or specified lengths up to 24 ft.. End matched tongue and groove is standard. Square ends or end-matched available up to 20 ft.. Lengths 18 ft. to 24 ft. may have structural finger-jointed lumber.

Pattern: standard vee, square edge, channel, and bullnose

Moisture Content: 10% to 12% average, maximum 15%

Adhesives: 100% exterior waterproof type, meeting ASTM D2559; cured under pressure using high-frequency electronics in a radio frequency (RF) press

Factory Finish: factory-applied, oven-dried, acrylic semi-transparent colors

Quality Control:

• Lumber graded under American Softwood Lumber Standard grading provisions
• Glueline certification complies with ASTM D205 and AITC 200
• Laminating is certified by an independent inspection agency